I have a few Reolink POE cameras(and poe doorbell) with an old mini pc running frigate, all on a battery backup so if the power goes for a bit the cameras and recording don’t. I also have a coral tpu installed in the mini pc.

All of my cameras are blocked at the firewall from leaving the network and they function fully, 100% local. When i plugged in the poe cable the cameras grabbed an ip address and you can interact with them through that.

As others have said there is also a home assistant integration for reolink that let’s you import and control the cameras from within home assistant as well as a frigate integration. I prefer having frigate on it’s own box so when i need to reboot home assistant my cameras are still recording.

Once it’s all set up you can have live video feed for each camera accessible within home assistant, on your dashboard if you like, as well as access to clips and continuous recordings depending on frigate configuration and storage capacity.

An option no doubt but there’s two reasons i’d not want to go that route unless necessary. First, i already have the device on hand and would like to find a solution to what i currently have. Two, i’d like to keep zone based motion if i’m able. Second of these can still be achieved by getting more sensors and blocking them into the zones i want but for one of my current sensors i’d have to buy three new ones.

The thought had crossed my mind but i’d still like to zone if i could.

I hope someone else knows a better way to do this because it would appear it is somewhat possible but not easy.

Subsonic servers, such as navidrome, offer the ability to “SyncPlayQueue” via api to specific players, but in the case of navidrome that does not included the web player or music assistant for home assistant (the later is an assumption as i was unable to find a setting to enable it).

For those who don’t care about home assistant they just need to find a player on the devices they want to transition music too and from that supports the feature.

For those who use home assistant and want to listen to music across devices you can transfer queue from within the music assistant player to a device added as a player or the app by picking “this device”. That only works if you’ve been playing music from your phone on a smart speaker, the music queue being played via web isn’t visible from the app and vice vera. It might be possible to set a web browser as a player to interact with but i imagine that would be a fragile setup at best.

Based on some older results i’ve found jellyfin isn’t set up to save play location in songs but if you ran the music folder as audio books it will. Not sure what that’ll do in regards to meta data but it’s only half the problem. I’d just as soon give up the time stamp memory if i could get playlist save state.

Credit where credit is do plexamp is the best option for what i want to achieve, I just hate having to authenticate through them and report the activity occurring between internal addresses.

I opened my server via web browser and started playing music and when i opened the app on my phone it didn’t show anything as playing. Either there’s a plugin i need to install, a setting i need to change, or it’s not an option with jellyfin.

So I understand this correctly, you’re using Fossify Calendar as the phone app that accesses your self-hosted calendar?

This was the second half of the fix that I needed. I filled this box with the address that shows when external connections would authenticate or play, and set “forwardfor” at the proxy, then the information came through. Thank you for this.

Turns out it was as simple as checking a box in my reverse proxy settings to enable “forwardfor” now to wait and see if the information actually gets passed through or if I have to do as NeryK suggests and enter the address in Jellyfin.

Save yourself time on downloading and look into tdarr

The issue is either the chromebook or the fully kiosk app, and i’m thinking it’s the app. Post reboot it won’t let me play music from or to the chromebook now.

The home assistant vm has 32 cores, the chromebook i’m not sure. I installed the fully kiosk app using the google play store.

Let’s discuss the chromebook since that’s where i want the issue addresses first. It’s a chromebook with the fully kiosk app running and it displays my home assistant internal address in the web browser. Through the kiosk app it’s a destination for media playback and the sound comes out of the chromebook speakers. The vm is assigned 24gb of ram and it’s using 8 of that and it’s using less than 1% of the 32 cpus i’ve assigned to it. If you’re wondering, the hardware is an old dual cpu server with more resources than i could ever hope to use so i over fed most of the vms i’m running. I doubt it’s a hardware issue on the server side but i’m willing to try anything.

It’s my understanding that yes, that is an option but i’m in the camp that any step i make at this point will be towards being as cloudless and local as possible with services like this. I agree that i’d trust them over the others but i don’t want to have to pick between a poor user experience, a large hardware cost, or trusting SOME company.

I’ve made automation for all of my most commonly said phrases and when using those it works but that limits it to only the things i’ve already thought to key in. Not very ideal but it works well enough.

You misunderstand my statement. The way i see people making this device better is by either having thousands of dollars of gpu hardware and running their own robust local model or sending their data off to something like chat gpt. The first i have no issue with, if only i had the budget for, the second feels worse to me than alexa. I know amazon knows a lot about me, i don’t need to start feeding all my data to an additional cloud entity.

I love everything Nabu Casa is doing and even though i don’t use any of the perks it offers i still pay for their monthly service to continue supporting them.

I don’t want my comment to come off negative towards the product because my experience has less to do with the speaker itself in more to do with my expectations but i’m less than impressed with it at the moment.

I was watching the live stream and bought one the moment they said sales were live, took about a week to get in. Having never used assist within home assistant before i thought at the very least i could say “turn off the kitchen” and the software would know there was a room called kitchen and turn anything off in it. Nope.

I will eventually get around to setting up my own local llm once i get the right hardware but i don’t understand all these people “glad to drop alexa and google” just to feed their data into a public online llm. Feels worse to me in some ways.

Currently it lives in my bedroom and the speaker is a bit to tin/treb to work for our sound machine but a $10 aux speaker did well enough with that. I had to manually plug phrases i want it to do into an automation but once i did that everything worked fine. At the end of the day, though, if i’m using an additional speaker i don’t understand why i should pay $60 for this when i could get the components and diy one for less than $35.